ChoiceTally is reader-supported. As an Amazon Associate we earn from qualifying purchases.
Components & Replacement Parts · Head to head

Arctic MX-4 vs MX-6 Thermal Paste: Which Should You Buy?

Arctic's older all-rounder against its newer, thicker, higher-performing paste.

ARCTIC MX-4 (4 g) - Premium Performance Thermal Paste for all processors (CPU, GPU - PC, PS4, XBOX), very high thermal conduc ARCTIC

ARCTIC MX-4 (4 g) - Premium Performance Thermal

★ 4.7 / 5 106,067 reviews
Checking latest price…
Check price on Amazon →
ARCTIC MX-6 (4 g) - Ultimate Performance Thermal Paste for CPU, consoles, graphics cards, laptops, very high thermal conducti ARCTIC

ARCTIC MX-6 (4 g) - Ultimate Performance Thermal

★ 4.7 / 5 16,361 reviews
Checking latest price…
Check price on Amazon →

Side by side

ARCTIC MX-4 (4 g) - PremiumARCTIC MX-6 (4 g) - Ultimate
PriceSee on Amazon →See on Amazon →
Rating★★★★★ 4.7★★★★★ 4.7
Review count106,06716,361
BrandARCTICARCTIC
Highlights
  • WELL PROVEN QUALITY: The design of our thermal paste packagings has changed several times, the formula of the …
  • EXCELLENT PERFORMANCE: ARCTIC MX-4 thermal paste is made of carbon microparticles, guaranteeing extremely high…
  • SAFE APPLICATION: The MX-4 is metal-free and non-electrical conductive which eliminates any risks of causing s…
  • 20% BETTER PERFORMANCE: With its improved composition, the ARCTIC MX-6 has a measurably lower thermal resistan…
  • PROVEN QUALITY: With over 20 years of experience in the PC cooling market, our focus was on improved performan…
  • RISK-FREE APPLICATION: MX-6 is neither electrically conductive nor capacitive. This eliminates the risk of sho…

Our verdict

MX-6 is the newer and higher-performing paste in Arctic's range, and it's the one to buy for a new build or a hot, overclocked CPU. Arctic quotes about 20% lower thermal resistance than MX-4 in its own lab and says MX-6 needs no burn-in period. MX-4 remains a perfectly sensible choice for a routine repaste of a laptop, console or stock-cooled CPU, and it's easier to spread. Both are non-conductive, so a spill on the board isn't the short-circuit risk that metal pastes carry.

Which one is for you?

What Arctic says changed

Arctic's MX-6 page says the paste is built on an improved composition over MX-4 and has about 20% better performance, measured as lower thermal resistance in Arctic's own lab. That is a manufacturer figure, not an independent test, so treat it as direction rather than a promised temperature drop.

Arctic doesn't publish a thermal conductivity number for either paste; both product pages point to an FAQ explaining why. So you can't compare them on a watts-per-metre-kelvin figure, and anyone quoting one is repeating an unofficial number.

Texture, spreading and burn-in

Arctic's spec tables show the difference clearly. The MX-4 lists a viscosity of 31,600 poise and a density of 2.50 g/cm³. The MX-6 lists 45,000 poise and 2.6 g/cm³, so it is a thicker paste.

Arctic says MX-6 is too viscous to spread with a spatula and that the cooler's contact pressure does the spreading, so a pea-sized dot in the middle is the usual approach. The MX-6 page also says it reaches full performance straight after application, without a burn-in period. The MX-4 page doesn't mention burn-in either way. The MX-6 listing adds that its viscosity suits direct-die cooling on graphics cards and console processors.

Safety on the board

Both are electrically non-conductive. Arctic lists a volume resistivity of 3.8 x 10¹³ Ω-cm for MX-4 and 1.8 x 10¹² Ω-cm for MX-6, and says MX-6 is neither conductive nor capacitive. The MX-4 page describes the paste as metal-free. In practice that means a little overspill near an SMD component isn't normally a short circuit risk, though you should still wipe it off.

Pack size matters less than people think. The listings for both are the 4 g tube, which covers several repastes of a desktop CPU; Arctic's MX-6 page lists 2 g, 4 g and 8 g sizes.

Who should skip both

If your cooler already has a pre-applied pad or you only need to seat an AIO that arrives with paste on the plate, you don't need either. And if your system is running hot because of dust or fan failure, new paste won't fix it. Browse replacement parts for fans and coolers.

Questions people ask

Is Arctic MX-6 better than MX-4?

On Arctic's own lab figures, yes: it claims about 20% lower thermal resistance. The gap in real-world CPU temperature will depend on your cooler and chip.

Does MX-6 need burn-in time?

Arctic says no: MX-6 reaches maximum performance right after application, with no burn-in period.

Is MX-4 or MX-6 electrically conductive?

Neither. Arctic describes both as non-conductive and lists volume resistivity figures for each.

Is MX-6 harder to apply than MX-4?

It is thicker: 45,000 poise against 31,600 for MX-4 on Arctic's pages. Arctic says it can't be spread with a spatula and relies on cooler pressure.

Can I use MX-6 on a graphics card or console?

The MX-6 listing says it suits direct-die cooling on GPUs and console processors. Both pastes are sold for CPUs and GPUs.

Sources

Prices are pulled live from Amazon.

Prices move around, so always confirm on Amazon before deciding. Browse more options in Components & Replacement Parts or see the whole Computers & Accessories department. New to the category? Start with our buying guide.